碳纤维复合材料修复带缺陷储气井的应力分析及试验研究

针对天然气储气井井管外壁腐蚀现状,采用有限元计算方法,分析不同外壁腐蚀类型、不同腐蚀缺陷尺寸下储气井井管的应力分布、承载极限及疲劳性能;加工带缺陷储气井井管试件,选择碳纤维复合材料湿缠绕法补强修复;对修复后的井管试件进行有限元应力分析,并进行爆破试验和疲劳试验,以充分验证补强方法的有效性;储气井井管的理论分析和性能试验证明,碳纤维复合材料湿缠绕法补强可以有效地修复带外壁缺陷的储气井井管,有效、快捷地解决在役天然气储气井井管外壁腐蚀问题。     

Enhancing nugget size and weldable current range of ultra-high-strength steel using multi-pulse resistance spot welding

ABSTRACT

This paper presents an innovative approach that uses a pulse-profile to improve the welding quality of CP1180 steel in resistance spot welding process. Three pulses with two cooling times were used in the developed multi-pulse welding (MPW) schedule. The experimental results show that the first pulse increases the contact area between the sheets to improve the current flow pattern. The second pulse was designed to extend the sheet-to-sheet contact area and corona bond for preventing rapid nugget growth. Using these designs, the nugget size was maximised through the third pulse. The maximum nugget size using the designed MPW schedule was 18.5% greater than that of the single-pulse welding schedule and the weldable current range was extended by 130%.     

考虑煤层倾角和钻孔倾角的钻屑量理论研究

为准确预测与预防深部开采煤与瓦斯突出,建立了考虑煤层倾角与钻孔倾角的新钻屑量理论计算公式,并分析了煤层倾角和钻孔倾角对钻屑量的影响。以平煤股份有限公司八矿为研究对象,将钻屑量理论计算值与该矿己15-21030风巷现场钻屑量实测值进行对比验证,得出在煤层倾角一定时,钻屑量随钻孔倾角增大呈幂指数递减关系,减小的比率呈“V”形变化趋势,原钻屑量理论值与实测值平均误差为5.5%,在考虑煤层倾角与钻孔倾角情况下的新钻屑量理论值与实测值平均误差为3.9%。     

The Crosstalk of Adipose-Derived Stem Cells (ADSC), Oxidative Stress,and Inflammation in Protective and Adaptive Responses

The potential use of stem cell-based therapies for the repair and regeneration of various tissues and organs is a major goal in repair medicine. Stem cells are classified by their potential to differentiate into functional cells. Compared with other sources, adipose-derived stem cells (ADSCs) have the advantage of being abundant and easy to obtain. ADSCs are considered to be tools for replacing, repairing, and regenerating dead or damaged cells. The capacity of ADSCs to maintain their properties depends on the balance of complex signals in their microenvironment. Their properties and the associated outcomes are in part regulated by reactive oxygen species, which mediate the oxidation-reduction state of cells as a secondary messenger. ADSC therapy has demonstrated beneficial effects, suggesting that secreted factors may provide protection. There is evidence that ADSCs secrete a number of cytokines, growth factors, and antioxidant factors into their microenvironment, thus regulating intracellular signaling pathways in neighboring cells. In this review, we introduce the roles of ADSCs in the protection of cells by modulating inflammation and immunity, and we develop their potential therapeutic properties.     

3D thermo-electro-chemo-mechanical coupled modeling of solid oxide fuel cell with double-sided cathodes

A solid oxide fuel cell based on double-sided cathodes is developed in our group, showing special properties and many advantages under some harsh conditions. To optimize the cell further, a thermo-electro-chemo-mechanical coupled 3D model is developed to simulate the distributions of temperature, current density, fuel gas and thermal stress under different voltages. The numerical results indicate that the temperature distribution, current, fuel gases and thermal stress is non-uniform in the cell at different voltages. The distribution of thermal stress in the electrolyte is also non-uniform because of the un-even electrochemical reaction and convective heat transfer. Furthermore, the result shows that about 47%~54% of maximum 1st principal stress in SOFC is caused by the mismatch of coefficients of thermal expansion (CTEs) among materials, while the other part of the maximum 1st principal stress is mainly caused by temperature gradient.     

基于流固耦合的柱面气膜密封支撑结构性能研究

利用流固耦合分析方法,研究一种波箔结构柔性支撑柱面气膜密封,探讨气膜厚度、浮环与转子的偏心率以及柔性支撑结构的泊松比、弹性模量、波箔数量等参数对支撑结构等效应力及变形量的影响。结果表明:柔性支承结构满足柱面气膜密封的正常运作,不会造成因为气膜刚度过大而使得浮环与波箔发生破坏性变形,并且变形量远小于波箔高度;柔性支撑的等效应力和变形量随平均气膜厚度的增大而减小,随偏心率的增加而增大,随支撑材料泊松比的增大而增大;弹性模量的增加并不影响柔性支撑结构的等效应力,但是会使变形量减小;增加波箔数量,柔性支撑的等效应力略有减小,变形量显著减小。     

镓锗铜萃余液综合利用研究与应用

本文针对镓锗铜综合回收系统产出的萃余液,设计通过中和氧化除杂、锌粉置换除铜镉、有机试剂除钴镍、纯碱法生产碱式碳酸锌、高温煅烧生产活性氧化锌和一步法生产元明粉的生产工艺流程,有效的将镓锗铜萃余液分类分离富集,产出具有价值的富集渣和工业产品,进一步提升综合回收经济效益。     

Moisture transfer and stress development during high-temperature drying of Chinese fir

Abstract

The knowledge of moisture content (MC) and drying stress are crucial parameters to control the drying process and maintain the quality of dried wood. Herein, we investigated the pattern of moisture transfer and stress development in Chinese fir during the high-temperature drying process. The MC in each layer of lumber was separated into bound water and free water via nuclear magnetic resonance (NMR), and the drying and residual stress were measured using prong test method. There was different MC in each layer along the thickness, resulting in an MC gradient that initially increased and then decreased, which is consistent with the trend of drying stress. The T₂₁ peak indicating bound water shifted to the left especially when MC was below the fiber saturation point, signifying that the discharge of moisture became difficult with prolonged drying time. The ratio of bound water to free water was different in each layer, indicating that the moisture transfer was different along the thickness. Furthermore, the residual stress was greater than the corresponding drying stress though the disparity reduced gradually, which suggests that the MC gradient was the largest affecting factor for drying stress at high MC stages but decreased to some extent as the drying process continued.     

Investigation of the residual stress in UO2-Mo composites via a neutron diffraction method

UO₂-Mo composites with a core-shell structure have been considered candidates for the thermal conductivity (TC)-enhanced UO₂ pellets and have demonstrated commercial potential for use in novel high-level safety reactors. Nevertheless, UO₂-Mo composites tend to form micro-cracks that are caused by the presence of residual stress (RS) during manufacturing. In this work, neutron diffraction measurements were employed to analyse the RS in UO₂-Mo core-shell structured composites fabricated by spark plasma sintering (SPS) for the first time. It was found that in the UO₂-Mo composites, the RS state present in the UO₂ matrix was tensile in nature. The RS in the UO₂ matrix increased with increaseing Mo content. There was a maximum value of 148 ± 15 MPa in the UO₂-10 vol% Mo composite. The micro-cracks produced in the high-Mo content composites were explained by the results of the neutron diffraction measurements. These results could provide significant guidance for the manufacturing and improvement of the operational performance of UO₂-Mo composites as next-generation fuels.